TM5-6115-640-14&P
Section XIV. ACCESSORY BOX MAINTENANCE
4-25. ACCESSORY BOX MAINTENANCE, AN/MJQ-33 ONLY.
This task covers:
1. Removal
2. Installation
Initial Setup:
1.
Tools - General Mechanics Tool Kit (5180-00-177-7033)
2.
Materials/Parts - Accessory Box (97403); 13226E7737
Power plant, AN/MJQ-33 only, is equipped with an accessory box which is mounted to the trailer bed between the front
and rear generator sets.
a.
Removal.
(1)
Remove, two each, fuel can brackets (paragraph 4-27) situated in front of accessory box.
(2)
Remove four screws (1, figure 4-12), eight flat washers (2), and four nuts (3) securing accessory box (4) to trailer
bed (5).
(3)
Remove accessory box from trailer bed.
b.
Installation.
(1)
Position accessory box (4) on trailer bed (5).
(2)
Insert four screws (1) with flat washers (2) through accessory box mounting brackets and trailer bed (5).
(3)
Working under trailer, install one flat washer (2) and nut (3) on each screw (1). Tighten hardware to secure
accessory box (4).
(4)
Install fuel can brackets (paragraph 4-27).
4-42
