TM 5-6115-629-14&P
E. TO STOP OPERATION OF UNIT(S), THIS PROCEDURE SHOULD BE FOLLOWED:
1. MOVE SWITCH BOX SWITCH, CORRESPONDING TO GENERATOR(S) STOPPED,
TO “OFF” POSITION.
2. OPEN CIRCUIT BREAKERS ON GENERATOR(S) TO BE STOPPED.
(7) Instruction p/ate.
(a) Location. This plate is located on the outside of load terminal cover.
(b) Content.
DANGER
HIGH VOLTAGE
(8) Identification plate.
(a) Location. This plate is located on the circuit breaker side of switch box above ground stud
E 1 .
(b) Content.
GROUND TERMINAL
(9) Instruction plate.
(a) Location. This plate is located on connector side of switch box above connectors J3 and
J4 (parallel cable inputs).
(b) Content.
PARALLELING CAPABILITY FOR
PRECISE GENERATOR SETS ONLY
(10) Designation plate,
(a) Location. This plate is located on load terminal side of switch box next to indicator lamp.
(b) Content.
PILOT LIGHT
OUTPUT
(11) Designation plate.
(a) Location. This plate is located on circuit breaker side of switch box above indicator lamp
DS2.
(b) Content.
PILOT LIGHT
GEN NO. 1
INPUT
1-7
