TM 5-6115-629-14&P
1-11.
Tabulated Data. The tabulated data provides operator and unit level personnel with the dimen-
sions and weights for Power Plant, AN/MJQ-12A. These specifications are computed from the com-
bined dimensions and weights of the two power units that make up the power plant. Specifications for a
single PU-650B/G power unit can be found in TM 5-6115-594-14&P. For additional information con-
cerning Generator Set DOD Model MEP-006A, refer to TM 5-6115-545-12, – 34, and – 24P. For
additional information on the M200A1 trailer, refer to TM 9-2330-205-14&P. The tabulated data also
includes the location and content of all data plates unique to the power plant.
a. Identification, Information, and Warning Plates.
(1) Modification identification p/ate.
(a) Location. This plate is located on front roadside
Iunette.
(b) Content.
MODIFIED FOR POWER PLANT AN/MJQ-12A
frame between the trailer body and
NSN 6115-00-464-4194
UNIT A (or B, as applicable)
(2) Identification p/ate.
(a) Location. This plate is located on front curbside frame between trailer body and Iunette.
(b) Content.
U.S.
POWER UNIT
PU-650B/G KW 60 HERTZ 50/60
NSN 6115-00-258-1622
(3) Identification plate.
(a) Location. This plate is located below ground stud above curbside front step.
(b) Content.
GROUND TERMINAL
(4) Wiring diagram designation plate.
(a) Location. This plate is located inside switch box access cover.
(b) Contents. (See figure 4-14 or 4-15).
(5) Identification
p/ate.
(a) Location. This plate is located on connector side of switch box.
(b) Content.
1-5
