TM 5-6115-628-14&P
b. Installation.
(1) Position fuel can bracket (4) on step (5).
(2) Insert four screws (1) down through bracket (4) and through step (5).
(3) Install one washer (3) and one nut (2) on each screw (1). Tighten hardware to secure
bracket (4).
4-19.
Accessory Box Replacement. (See figure 4-6.) The accessory boxes are mounted to the
trailer frames at the curbside front steps. Replacement procedures are typical.
a. Removal.
(1) Remove three screws (1, figure 4-6), three flat washers (2), and three nuts (3) securing
accessory box (4) to trailer frame (5).
(2) Slide accessory box (4) forward and off of front step (6).
Figure 4-6. Accessory Box Replacement.
b. Installation.
(1) Position accessory box (4) on front trailer step (6) with narrow end between handbrake
lever (7) and trailer frame (5).
(2) Lift accessory box (4) so that top of box contacts lip of trailer frame (5).
4-17
