TM 5-6115-627-14&P
(1) Removal.
(a) Remove 24 screws (1, figure 5-8),24 Iockwashers (2), and 24 flat washers (3) securing access cover
(4) to switch box (5) and remove cover.
(b) Remove one nut (6), one Iockwasher (7) and one flat washer (8), and remove associated wires (9)
from load terminal (10).
(c) Remove one flat washer (11) and one nut (12) and remove load terminal (10) from terminal
board (13).
(2) Installation.
(a) Install load terminal (10) in terminal board (13) and secure with flat washer (11) and nut (12).
(b) Install associated wires (9) on load terminal (10) and secure with flat washer (8), Iockwasher (7), and
nut (6).
(c) Position access cover
24 flat washers (3).
(4) on switch box (5) and secure with 24 screws (1), 24 Iockwashers (2), and
Figure 5-8. Load Terminal Replacement.
5-10
