TM 5-6115-627-14&P
4-30. Switch Box Assembly Replacement. (See figure 4-16)
a. Removal.
(1) Working underneath fender (1, figure 4-1 6), remove one nut (2) and one Iockwasher (3) from each of six
screws (4).
(2) Working on top of fender (1), remove six screws (4) and six flat washers (5) attaching switch box
assembly (6) to fender.
(3) Lift switch box assembly (6) off fender (1).
b. Installation.
(1)
(2)
(3)
Position switch box assembly (6) on fender(1) so that mounting holes line up.
Insert six screws (4) with one flat washer (5) each down through switch box flanges and through
fender (1).
Working under fender (1), install one Iockwasher (3) and one nut (2) on each screw (4)
Figure 4-16. Switch Box Assembly Replacement.
4-32
