ARMY TM 5-6115-625-14&P
N O TE
Mounting brackets are fastened with lock nuts. Removal may damage locking
capability when reinstalled. Do not remove mounting brackets unless they are
d a m a g e d.
(3) Remove three screws (7), three flat washers (8) and three nuts (9) from each mounting
bracket (5) and take mounting brackets off of trailer frame (10).
b. Installation.
(1)
(2)
(3)
N O T E
If mounting brackets have not been removed, omit step (1).
Position each mounting bracket (5) on trailer frame (10). Insert three screws (7) through
frame into each bracket. Install one washer (8) and one nut (9) on each screw and
t i g h t e n.
Holding platform (4) in vertical position, position platform on mounting brackets (5) so that
holes in platform line up with holes in brackets and install platform anchors (6) in upper
mounting holes on each side of platform.
Secure platform (4) to brackets (5) with two screws (1), four flat washers (2) and two
nuts (3).
4-23/(4-24 blank)
