TM 9-6150-228-13&P
REMOVAL
a.
Main Bus Bars.
(1) Perform removal procedures in paragraphs 5-9.a.1 and 5-9.b.1.
(2) Remove nine screws (2), three bus bars (5) and nine spacers (25).
(3) Remove four screws (1) and chassis bracket (20).
(4) Remove four edge trims (3) and (4) if defective.
(5) Remove six nuts (15), lockwashers (14), flat washers (1 3) and bolts (7).
(6) Remove eight screws (6), two Z-rails (8), and two chassis brackets (9 and 1 0).
(7) Remove nine screws (21), flatwashers (22), insulators (24) and three paper insulators (23) from three chassis
brackets (9 and 10).
(8) Remove six nuts (19), lock washers (18), flat washers (17), bolts (11) and three mounting rails (12) from support
frame (16).
5-15
