TM 9-6150-228-13&P
SECTION III. DIRECT SUPPORT MAINTENANCE PROCEDURES
5.6
TOP COVER ASSEMBLY.
This task covers: Repair
INTIAL SETUP
Tools
Equipment Conditions
General Mechanic's Automotive Tool Kit
Reference
(Item 2, Appendix B).
Para 4.12 Top cover assembly removed.
Drill (Item 4, Appendix B).
Riveter, Blind Head (item 5, Appendix B).
General Safety Instructions
Materials/Parts
WARNING
Hinges (Item 4, Appendix F).
Rivets (Item 3, Appendix F).
High voltage is present in this equipment during
Gasket (Item 5, Appendix F).
operation. Do not attempt making any repairs
without first shutting down all input power from
the power distribution panel. Failure to observe
Personnel Required
this warning could result in serious injury or
death.
Two.
REPAIR
a. Drill out four rivets (1, Figure 5-1) and remove two keepers (2).
b. Drill out four rivets (3) and remove two hinges (4). Remove gasket (5) if damaged and discard.
Figure 5-1. Top Cover Assembly.
5-2
