TM 9-6150-226-13
TEST REMINDER
THE CIRCUIT BREAKERS ON THIS PANEL THAT CONTAIN A “PUSH TO TEST”
BUTTON ARE OF THE “GROUND FAULT CIRCUIT INTERRUPTER” (GFCI) TYPE.
FOR RELIABLE PROTECTION FROM ELECTRICAL SHOCK, EACH GFCI BREAKER
SHOULD BE TESTED AT THE BEGINNING OF EACH SETUP AND AT MONTHLY
INTERVALS THEREAFTER DURING CONTINUOUS OPERATIONS.
TO TEST THE GFCI BREAKER, PROCEED AS FOLLOWS:
1.
CONNECT POWER SOURCE TO THE INPUT CONNECTOR.
2.
TURN ON THE MAIN CIRCUIT BREAKER.
3.
TURN ON THE GFCI CIRCUIT BREAKER.
4.
PUSH THE “PUSH TO TEST BUTTON.”
5.
ENTER DATE TEST WAS PERFORMED AND INITIAL.
6.
UNDER NOTES-RECORD ANY FAILURE AND ACTION TAKEN.
7.
ALL ENTRIES SHOULD BE MADE WITH A MARKER THAT WILL PROVIDE A LEGIBLE
RECORD AND THAT IS ERASABLE FOLLOWING THE TERMINATIONS OF AND OR
COMPLETED MAINTENANCE ACTIONS.
YEAR
DATE
INIT
YEAR
DATE
INIT
YEAR
DATE
INIT
JAN
FEB
MAR
APR
MAY
JUN
JUL
AUG
SEP
OCT
NOV
DEC
NOTES :
FIGURE 2-11.
Ground fault test record, right side of control panel.
2-47
