TM 9-6115-730-24
0106
REMOVAL
1. Remove 19 bolts (Figure 1, Item 1), washers (Figure 1, Item 2), bolt (Figure 1, Item 3), and washer (Figure 1,
Item 4).
2. Remove two studs (Figure 1, Item 5), washers (Figure 1, Item 6), front cover (Figure 1, Item 7), and gasket
(Figure 1, Item 8).
3. If necessary, remove two bolts (Figure 1, Item 9), washers (Figure 1, Item 10), cover (Figure 1, Item 11), and
gasket (Figure 1, Item 12).
END OF TASK
INSTALLATION
1. If removed, install cover (Figure 1, Item 11), gasket (Figure 1, Item 12), two washers (Figure 1, Item 10), and
bolts (Figure 1, Item 9).
2. Install gasket (Figure 1, Item 8), front cover (Figure 1, Item 7), two washers (Figure 1, Item 6), and studs
(Figure 1, Item 5).
3. Install washer (Figure 1, Item 4), bolt (Figure 1, Item 3), 19 washers (Figure 1, Item 2), and bolts (Figure 1,
Item 1). Torque bolts (Figure 1, Item 3) and (Figure 1, Item 1) to 15-25 lb-ft (21-35 Nm).
4. Install crankshaft front seal (WP 0105).
5. Install crankshaft vibration damper and pulley (WP 0104).
6. Install fan pulley (WP 0099).
0106-2
