TM 9-6115-730-24
0105
REMOVAL
1. Remove five nuts (Figure 1, Item 1) and washers (Figure 1, Item 2).
2. Remove crankshaft front seal retainer (Figure 1, Item 3) and seal (Figure 1, Item 4).
END OF TASK
INSTALLATION
NOTE
Crankshaft front seal must be installed dry.
1. Place seal (Figure 1, Item 4) on crankshaft. Push crankshaft front seal retainer (Figure 1, Item 3) into place.
This will dislodge the shipping sleeve.
2. Install five washers (Figure 1, Item 2) and nuts (Figure 1, Item 1).
3. Install crankshaft vibration damper and pulley (WP 0104).
0105-2
