TM 9-6115-730-24
0104
REMOVAL
1. Remove six bolts (Figure 1, Item 2) and pulley (Figure 1, Item 3).
2. Remove eight bolts (Figure 1, Item 4), washers (Figure 1, Item 5), spacer (Figure 1, Item 6), damper
(Figure 1, Item 7), and adapter (Figure 1, Item 8) from crankshaft.
END OF TASK
INSTALLATION
1. Install adapter (Figure 1, Item 8), damper (Figure 1, Item 7), spacer (Figure 1, Item 6), eight washers
(Figure 1, Item 5), and bolts (Figure 1, Item 4). Torque bolts (Figure 1, Item 4) to 34-48 lb-ft (45-65 Nm).
2. Install pulley (Figure 1, Item 3) and six bolts (Figure 1, Item 2). Torque bolts (Figure 1, Item 2) to 145-305 lb-ft
(200-280 Nm).
3. Install belt (Figure 1, Item 1) and set belt tension (WP 0077).
0104-2
