TM 9-6115-730-24
0098
REMOVAL - Continued
Figure 1. Engine Electrical System Repair (Sheet 3 of 3).
7. Remove fuel pressure sensor (Figure 1, Sheet 1, Item 5), seal (Figure 1, Sheet 1, Item 6), and adapter
(Figure 1, Sheet 1, Item 7).
8. Tag and disconnect ECM to EMCP harness connector ENG-P14 from magnetic speed pickup (Figure 1,
Sheet 1, Item 9).
9. Loosen locknut (Figure 1, Sheet 1, Item 8) and remove magnetic speed pickup (Figure 1, Sheet 1, Item 9).
10. Drain level of coolant below coolant temperature sensor (WP 0065).
11. Remove bolt (Figure 1, Sheet 2, Item 12) and clamp (Figure 1, Sheet 2, Item 11).
12. Tag and disconnect engine harness connector ENG-P100 from coolant temperature sensor (Figure 1,
Sheet 2, Item 10).
13. Remove coolant temperature sensor (Figure 1, Sheet 2, Item 10) with O-ring from water outlet manifold
(Figure 1, Sheet 2, Item 13).
14. Remove bolt (Figure 1, Sheet 2, Item 14) and clamp (Figure 1, Sheet 2, Item 15).
0098-5
