TM 9-6115-730-24
0097
REPAIR OR REPLACEMENT - Continued
NOTE
Repair of the engine/generator base assembly is limited to removal of corrosion, welding of
cracks, and painting.
2. Remove attached assemblies as required to gain access to parts of engine/generator base assembly
requiring repair.
3. Remove corrosion as required using crocus cloth.
4. Repair cracks in weldment by welding in accordance with TC 9-237.
5. Clean weld surface and surrounding area, pretreat, and paint in accordance with MIL-DTL-53072C, with top
coat to a thickness of 1-2 mils.
6. Replace foam damping sections by using the old sections as templates to cut the new sections.
7. Install attached assemblies that were removed.
END OF TASK
END OF WORK PACKAGE
0097-2
