TM 9-6115-730-24
0074
INSTALLATION - Continued
Figure 1. Alternator.
END OF TASK
BELT TENSION ADJUSTMENT
1. Check belt tension on belt (Figure 1, Item 1) farthest from the engine using tension gauge. Tension for new
belts should be 155-165 lb (690-734 Nm). For belts which have operated more than 30 minutes, the tension
should be 90-110 lb (401-489 Nm).
2. Adjust tension as required by turning nuts (Figure 1, Item 2) and (Figure 1, Item 3) until desired tension is
achieved. Tighten nuts (Figure 1, Item 2) and (Figure 1, Item 3) to lock in adjustment.
END OF TASK
END OF WORK PACKAGE
