TM 9-6115-730-24
0067
REMOVAL - Continued
16. Remove eight hose clamps (Figure 1, Sheet 2, Item 41), manifold in tube (Figure 1, Sheet 2, Item 42), and
two bellows (Figure 1, Sheet 2, Item 43).
17. Below water separator filter, remove hose barb fitting (Figure 1, Sheet 1, Item 44), swivel fitting (Figure 1,
Sheet 1, Item 45), two hose clamps (Figure 1, Sheet 1, Item 46), and hose (Figure 1, Sheet 1, Item 47).
18. On left side of engine, remove two hose clamps (Figure 1, Sheet 1, Item 48), hose (Figure 1, Sheet 1, Item 49),
hose clamp (Figure 1, Sheet 1, Item 50), upper radiator hose (Figure 1, Sheet 1, Item 51), drain valve
(Figure 1, Sheet 1, Item 52), 90 degree elbow (Figure 1, Sheet 1, Item 53), and hose elbow (Figure 1,
Sheet 1, Item 54).
19. On lower right side of engine, remove two hose clamps (Figure 1, Sheet 3, Item 55) and lower radiator hose
(Figure 1, Sheet 3, Item 56).
END OF TASK
INSTALLATION
NOTE
Apply sealing compound to all male pipe threads before connecting.
1. At lower right side of engine, install lower radiator hose (Figure 1, Sheet 3, Item 56) and two hose clamps
(Figure 1, Sheet 3, Item 55).
2. On left side of engine, install hose elbow (Figure 1, Sheet 1, Item 54), 90 degree elbow (Figure 1, Sheet 1,
Item 53), drain valve (Figure 1, Sheet 1, Item 52), upper radiator hose (Figure 1, Sheet 1, Item 51), hose
clamp (Figure 1, Sheet 1, Item 50), hose (Figure 1, Sheet 1, Item 49), and two hose clamps (Figure 1,
Sheet 1, Item 48).
3. Below water separator filter, install hose (Figure 1, Sheet 1, Item 47), two hose clamps (Figure 1, Sheet 1,
Item 46), swivel fitting (Figure 1, Sheet 1, Item 45), and hose barb fitting (Figure 1, Sheet 1, Item 44).
4. On top of engine, install two bellows (Figure 1, Sheet 2, Item 43), manifold in tube (Figure 1, Sheet 2,
Item 42), and eight hose clamps (Figure 1, Sheet 2, Item 41).
5. Install two bellows (Figure 1, Sheet 2, Item 40), manifold out tube (Figure 1, Sheet 2, Item 39), and eight hose
clamps (Figure 1, Sheet 2, Item 38).
6. On right side of engine, install nipple (Figure 1, Sheet 3, Item 37), 90 degree elbow (Figure 1, Sheet 3,
Item 36), and fitting (Figure 1, Sheet 3, Item 35). Install hose (Figure 1, Sheet 3, Item 34) and two hose clamps
(Figure 1, Sheet 3, Item 33).
7. On right side of radiator, install two fittings (Figure 1, Sheet 3, Item 32), hose (Figure 1, Sheet 2, Item 28), and
hose clamp (Figure 1, Sheet 3, Item 31). On right side of engine, install hose (Figure 1, Sheet 2, Item 27) and
hose clamp (Figure 1, Sheet 3, Item 30).
8. On top of engine, install two loop clamps (Figure 1, Sheet 2, Item 29).
0067-7
