TM 9-6115-730-24
0061
WATER SEPARATOR FILTER REMOVAL - Continued
5. Remove two screws (Figure 1, Item 11), lockwashers (Figure 1, Item 12), spacers (Figure 1, Item 13), and
water separator filter assembly (Figure 1, Item 7) with bracket (Figure 1, Item 14).
6. Remove two screws (Figure 1, Item 15), washers (Figure 1, Item 16), lockwashers (Figure 1, Item 17), nuts
(Figure 1, Item 18), and bracket (Figure 1, Item 14).
7. Remove clamp (Figure 1, Item 19), swivel (Figure 1, Item 20), clamp (Figure 1, Item 21), and hose barb
(Figure 1, Item 22) from hose (Figure 1, Item 23).
8. If necessary, remove two elbows (Figure 1, Item 24).
END OF TASK
WATER SEPARATOR FILTER INSTALLATION
NOTE
Install tiedown straps as required.
1. Apply sealant to male threads and install two elbows (Figure 1, Item 24) on water separator filter assembly
(Figure 1, Item 7).
2. Install hose barb (Figure 1, Item 22) on hose (Figure 1, Item 23) with clamp (Figure 1, Item 21), swivel
(Figure 1, Item 20), and clamp (Figure 1, Item 19).
3. Install water separator filter assembly (Figure 1, Item 7) onto bracket (Figure 1, Item 14), and secure with two
nuts (Figure 1, Item 18), lockwashers (Figure 1, Item 17), washers (Figure 1, Item 16), and screws (Figure 1,
Item 15).
4. Install bracket (Figure 1, Item 14) with water separator filter assembly (Figure 1, Item 7), two spacers
(Figure 1, Item 13), lockwashers (Figure 1, Item 12), and screws (Figure 1, Item 11).
5. Connect hose (Figure 1, Item 10) and hose (Figure 1, Item 9) to water separator filter assembly (Figure 1,
Item 7).
6. Connect hose (Figure 1, Item 5) to drain port on bottom of water separator filter bowl (Figure 1, Item 3) and
install clamp (Figure 1, Item 4).
7. Close left front door.
END OF TASK
END OF WORK PACKAGE
0061-4
