TM 9-6115-730-24
0062
INSTALLATION
1. Clean area on fuel tank where gasket (Figure 1, Sheet 1, Item 5) is to be installed.
CAUTION
Install sender as marked or incorrect fuel level indications will result.
2. Apply sealing compound to both sides of gasket (Figure 1, Sheet 1, Item 5) and install gasket, fuel level sender
assembly (Figure 1, Sheet 1, Item 1), five washers (Figure 1, Sheet 1, Item 4), lockwashers (Figure 1,
Sheet 1, Item 3), and screws (Figure 1, Sheet 1, Item 2).
NOTE
Install tiedown straps as required.
3. Remove tags and connect wires from fuel level sender (Figure 1, Sheet 1, Item 1).
4. Close left rear doors.
END OF TASK
END OF WORK PACKAGE
0062-5/6 blank
