TM 9-6115-729-24
DIRECT SUPPORT (FIELD) LEVEL MAINTENANCE
TACTICAL QUIET GENERATOR 100 kW, 50/60 Hz MEP-807A/PU-807A
UNIT INJECTOR MAINTENANCE
INITIAL SETUP:
Tools and Special Tools
Materials/Parts (cont.)
Shop Equipment, Automotive Maintenance,
Wiping rags (WP 0120, Item 36)
Common No. 1 (WP 0119, Item 2)
Shop Equipment, Field Maintenance, Basic
Personnel Required
(WP 0119, Item 3)
One
Materials/Parts
References
Backup ring
Backup ring
TM 9-6115-729-24P
Backup ring
Cleaning solvent (WP 0120, Item 8)
Equipment Condition
Engine oil (WP 0120, Items 27 thru 34)
O-Ring (2)
Injection actuation pressure sensor removed
Seal (2)
Seal (2)
Valve cover, gasket, and manifold removed
Seal (2)
WARNINGS
Metal jewelry will conduct electricity. All jewelry can become entangled in generator set
components. Remove all jewelry when working on generator set. Failure to comply can cause
injury or death to personnel by electrocution.
DO NOT wear loose clothing when performing checks, services and maintenance. Failure to
comply can cause injury or death to personnel.
High voltage is produced when this generator set is in operation. Make sure unit is completely shut
down and free of any power source before attempting any repair or maintenance on the unit.
Failure to comply can cause injury or death to personnel.
High voltage is produced when the generator set is in operation. Never attempt to start or
maintain the generator set unless it is properly grounded. Failure to comply can cause injury or
death to personnel.
CAUTION
All fittings and openings must be plugged immediately after opening with clean rags to prevent
contamination of the engine. Injector cleanliness is essential.
0114-1
