TM 9-6115-729-24
0111
INSTALLATION - Continued
4. Install O-ring (Figure 1, Item 13), elbow (Figure 1, Item 12), and O-ring (Figure 1, Item 11) and connect tube
(Figure 1, Item 10).
5. Install preformed packing (Figure 1, Item 9), check valve (Figure 1, Item 8), spring (Figure 1, Item 7), and plug
(Figure 1, Item 6).
6. Install three O-rings (Figure 1, Item 5), oil filter base (Figure 1, Item 4), five washers (Figure 1, Item 3), two
bolts (Figure 1, Item 2), and three screws (Figure 1, Item 1). Torque bolts (Figure 1, Item 2) and screws
(Figure 1, Item 1) to 15-25 lb-ft (20-34 Nm).
7. Install oil filter (WP 0081).
END OF TASK
END OF WORK PACKAGE
0111-4
