TM 9-6115-729-24
0102
INSTALLATION
1. Install O-ring (Figure 1, Item 12) and fuel transfer pump (Figure 1, Item 3) with washer (Figure 1, Item 11),
screw (Figure 1, Item 10), two washers (Figure 1, Item 9), and screws (Figure 1, Item 8).
2. Install hose (Figure 1, Item 6) onto adapter (Figure 1, Item 7) on engine and onto fuel transfer pump (Figure 1,
Item 3) by aligning the hose fitting into the mating fittings, pushing the hose fittings until a definite snap and a
solid stop are felt. Then abruptly pull back out on the hose on both ends to verify a proper connection has
been made.
3. Connect tube (Figure 1, Item 5) and hose (Figure 1, Item 4) to fuel transfer pump (Figure 1, Item 3).
4. Connect electrical connector (Figure 1, Item 2) and hose (Figure 1, Item 1) to fuel transfer pump (Figure 1,
Item 3).
END OF TASK
END OF WORK PACKAGE
0102-5/6 blank
