TM 9-6115-729-24
0060
DRAINING
1. Open left front door.
2. Rotate valve (Figure 1, Item 1) and air vent (Figure 1, Item 2) to allow water to drain from bowl (Figure 1,
Item 3).
3. Rotate valve (Figure 1, Item 1) and air vent (Figure 1, Item 2) to close.
4. Close left front door.
END OF TASK
FILTER ELEMENT REPLACEMENT
1. Open left front doors.
2. Remove clamp (Figure 1, Item 4) and disconnect hose (Figure 1, Item 5) from drain port on bottom of water
separator filter bowl (Figure 1, Item 3).
3. Remove bowl (Figure 1, Item 3) and gasket (Figure 1, Item 6) from water separator filter assembly (Figure 1,
Item 7) and remove filter element (Figure 1, Item 8).
4. Inspect gasket and replace as required.
5. Add a light coat of fuel to the gasket and install new filter element (Figure 1, Item 8) into water separator
assembly (Figure 1, Item 7). Apply a light coat of fuel to the gasket and install gasket (Figure 1, Item 6) and
bowl (Figure 1, Item 3).
6. Connect hose (Figure 1, Item 5) to bottom of bowl (Figure 1, Item 3) and install clamp (Figure 1, Item 4).
7. Close left front doors.
0060-2
