TM 9-6115-729-24
0059
REMOVAL
1. Ensure generator set is fully stopped, ENGINE CONTROL switch is OFF/RESET, Battery Disconnect Switch
is OFF, and DEAD CRANK SWITCH is OFF before proceeding.
2. Remove eight nuts (Figure 1, Sheet 2, Item 1), lockwashers (Figure 1, Sheet 2, Item 2), bolts (Figure 1, Sheet
2, Item 3) and left and right radiator mounting brackets (Figure 1, Sheet 2, Item 4).
3. Remove two screws (Figure 1, Sheet 1, Item 5), two screws (Figure 1, Sheet 1, Item 6), lockwashers
(Figure 1, Sheet 1, Item 7), washers (Figure 1, Sheet 1, Item 8), and plate (Figure 1, Sheet 1, Item, 9).
4. Remove three screws (Figure 1, Sheet 1, Item, 10), lockwashers (Figure 1, Sheet 1, Item, 11), washers
(Figure 1, Sheet 1, Item, 12).
5. Remove three screws (Figure 1, Sheet 1, Item 13), lockwashers (Figure 1, Sheet 1, Item 14), washers (Figure
1, Sheet 1, Item 15).
6. Remove four screws (Figure 1, Sheet 1, Item 16), lockwashers (Figure 1, Sheet 1, Item 17), washers (Figure
1, Sheet 1, Item 18).
7. Remove three screws (Figure 1, Sheet 1, Item 19), lockwashers (Figure 1, Sheet 1, Item 20), washers (Figure
1, Sheet 1, Item 21).
8. Remove base baffle left (Figure 1, Sheet 1, Item 22) and base baffle right (Figure 1, Sheet 1, Item 23).
9. Remove four screws (Figure 1, Sheet 1, Item 24), lockwashers (Figure 1, Sheet 1, Item 25), washers (Figure
1, Sheet 1, Item 26), two baffle base brackets (Figure 1, Sheet 1, Items 27 and 28).
10. Remove screw (Figure 1, Sheet 1, Item 29), lockwasher (Figure 1, Sheet 1, Item 30), and washer (Figure 1,
Sheet 1, Item 31).
11. Remove two screws (Figure 1, Sheet 1, Item 32), lockwashers (Figure 1, Sheet 1, Item 33), and washers
(Figure 1, Sheet 1, Item 34).
12. Remove four screws (Figure 1, Sheet 1, Item 35), lockwashers (Figure 1, Sheet 1, Item 36), washers (Figure
1, Sheet 1, Item 37), and left lower front base baffle (38) and bottom front baffle (39).
13. Disconnect hose (Figure 1, Sheet 2, Item 40) and hose (Figure 1, Sheet 2, Item 41) from fuel cooler (Figure 1,
Sheet 2, Item 42).
14. Remove four screws (Figure 1, Sheet 2, Item 43), eight washers (Figure 1, Sheet 2, Item 44), and bushings
(Figure 1, Sheet 2, Item 45).
15. Remove fuel cooler (Figure 1, Sheet 2, Item 42).
0059-2
