TM 9-6115-729-24
0058
INSTALLATION
NOTE
Apply sealing compound to all male pipe threads before connecting.
1. If removed, install two elbows (Figure 1, Item 18).
2. Install solenoid valve (Figure 1, Item 8), two lockwashers (Figure 1, Item 17), and two screws (Figure 1,
Item 16).
3. Connect two hoses (Figure 1, Item 15) and (Figure 1, Item 14) to solenoid valve (Figure 1, Item 8).
4. If removed, install two elbows (Figure 1, Item 13) and (Figure 1, Item 12) to auxiliary fuel pump (Figure 1,
Item 5).
5. Making sure ground lug (Figure 1, Item 19) is positioned between screw (Figure 1, Item 11) and washer
(Figure 1, Item 10), install auxiliary fuel pump (Figure 1, Item 5), two screws (Figure 1, Item 11), washers
(Figure 1, Item 10), and locknuts (Figure 1, Item 9).
NOTE
Install tiedown straps as required.
6. Remove tags and connect wires to solenoid valve (Figure 1, Item 8).
7. Connect hose (Figure 1, Item 7) and hose (Figure 1, Item 6).
8. Close left rear doors, and left front doors.
END OF TASK
END OF WORK PACKAGE
0058-4
