TM 9-6115-729-24
0057
REMOVAL
1. Ensure generator set is fully stopped, ENGINE CONTROL switch is OFF/RESET, Battery Disconnect Switch is
OFF, and DEAD CRANK SWITCH is OFF before proceeding.
2. Open left front doors.
3. Disconnect hose (Figure 1, Item 1) from fuel pickup tube (Figure 1, Item 2).
4. Remove five screws (Figure 1, Item 3), lockwashers (Figure 1, Item 4), washers (Figure 1, Item 5), fuel pickup
tube (Figure 1, Item 2), and gasket (Figure 1, Item 6).
END OF TASK
INSTALLATION
1. Clean area on fuel tank where gasket (Figure 1, Item 6) will be installed.
2. Apply sealing compound to both sides of gasket (Figure 1, Item 6), and install gasket, fuel pickup tube
(Figure 1, Item 2), five washers (Figure 1, Item 5), lockwashers (Figure 1, Item 4), and screws (Figure 1,
Item 3).
3. Connect hose (Figure 1, Item 1) to fuel pickup tube (Figure 1, Item 2).
4. Close left front doors.
0057-2