TM 9-6115-729-24
0056
INSTALLATION - Continued
8. If removed, install adapter (Figure 1, Sheet 1, Item 36) and elbow (Figure 1, Sheet 1, Item 35) on engine fuel
pump, and install elbow (Figure 1, Sheet 3, Item 34) on water separator filter (Figure 1, Sheet 3, Item 5).
9. Connect hose assembly (Figure 1, Sheet 3, Item 33) to elbow (Figure 1, Sheet 1, Item 35) and to elbow
(Figure 1, Sheet 3, Item 34).
10. If removed, install elbow (Figure 1, Sheet 2, Item 31) on auxiliary fuel pump (Figure 1, Sheet 2, Item 32) and
install adapter (Figure 1, Sheet 2, Item 30) on fuel tank (Figure 1, Sheet 1, Item 8). Connect hose assembly
(Figure 1, Sheet 2, Item 29) to elbow (Figure 1, Sheet 2, Item 31) and to adapter (Figure 1, Sheet 2, Item 30).
11. If removed, install swivel elbow (Figure 1, Sheet 3, Item 28) on fuel cooler (Figure 1, Sheet 3, Item 24), and
install regulator (Figure 1, Sheet 3, Item 27) and adapter (Figure 1, Sheet 3, Item 26) on engine fuel return.
12.Connect hose assembly (Figure 1, Sheet 3, Item 25) to swivel elbow (Figure 1, Sheet 3, Item 28) and to
adapter (Figure 1, Sheet 3, Item 26).
13. If removed, install elbow (Figure 1, Sheet 3, Item 23) on fuel tank (Figure 1, Sheet 1, Item 8). Connect hose
assembly (Figure 1, Sheet 3, Item 22) to elbow (Figure 1, Sheet 3, Item 23) and to fuel cooler (Figure 1,
Sheet 3, Item 24).
14. Install radiator (WP 0067).
15. If removed, install elbow (Figure 1, Sheet 3, Item 21), tee (Figure 1, Sheet 2, Item 14), and male connector
(Figure 1, Sheet 3, Item 20) on fuel tank (Figure 1, Sheet 1, Item 8).
16. Connect hose assembly (Figure 1, Sheet 3, Item 19) to elbow (Figure 1, Sheet 3, Item 21) and to male
connector (Figure 1, Sheet 3, Item 20).
17. If removed, install nipple (Figure 1, Sheet 1, Item 18), washer (Figure 1, Sheet 1, Item 17), seal nut (Figure 1,
Sheet 1, Item 16), adapter (Figure 1, Sheet 1, Item 9), and fitting (Figure 1, Sheet 1, Item 15) on fuel tank filler
neck (Figure 1, Sheet 1, Item 11).
18. Install elbow (Figure 1, Sheet 2, Item 13) on tee (Figure 1, Sheet 2, Item 14).
19. Connect hose assembly (Figure 1, Sheet 2, Item 12) to elbow (Figure 1, Sheet 2, Item 13) and to tee (Figure 1,
Sheet 1, Item 10).
20. If removed, install elbow (Figure 1, Sheet 1, Item 7) on fuel tank (Figure 1, Sheet 1, Item 8). Connect hose
assembly (Figure 1, Sheet 1, Item 6) to elbow (Figure 1, Sheet 1, Item 7) and to adapter (Figure 1, Sheet 1,
Item 9).
21. If removed, install elbow (Figure 1, Sheet 3, Item 4) on water separator filter (Figure 1, Sheet 3, Item 5), and
install elbow (Figure 1, Sheet 3, Item 2) on fuel pickup tube assembly (Figure 1, Sheet 3, Item 3).
22. Connect hose assembly (Figure 1, Sheet 3, Item 1) to elbow (Figure 1, Sheet 3, Item 2) and to elbow
(Figure 1, Sheet 3, Item 4).
23. Close right rear doors, right front doors, left rear doors, and left front doors.
END OF TASK
END OF WORK PACKAGE
0056-7/8 blank
