TM 9-6115-729-24
0056
REMOVAL - Continued
15. If necessary, remove elbow (Figure 1, Sheet 3, Item 34), elbow (Figure 1, Sheet 1, Item 35), and adapter
(Figure 1, Sheet 1, Item 36).
16. Disconnect hose assembly (Figure 1, Sheet 2, Item 37) from elbow (Figure 1, Sheet 2, Item 38) on auxiliary
fuel pump (Figure 1, Sheet 2, Item 32) and from bulkhead elbow (Figure 1, Sheet 2, Item 39) on filler neck
pocket (Figure 1, Sheet 2, Item 40).
17. If necessary, remove elbow (Figure 1, Sheet 2, Item 38), cap (Figure 1, Sheet 2, Item 41), oversize washer
(Figure 1, Sheet 2, Item 42), bulkhead locknut (Figure 1, Sheet 2, Item 43), and bulkhead elbow (Figure 1,
Sheet 2, Item 39).
18. Remove cap (Figure 1, Sheet 3, item 44) and drain fuel from tank (Figure 1, Sheet 1, item 8). Use suitable
container to collect fuel and dispose of in accordance with local ordinances.
19. Remove elbow (Figure 1, Sheet 3, item 45), drain valve (Figure 1, Sheet 1, item 46), and adapter (Figure 1,
Sheet 3, item 47) as an assembly.
20. Disassemble elbow (Figure 1, Sheet 3, item 45), drain valve (Figure 1, Sheet 3, item 46) and adapter (Figure
1, Sheet 3, item 47).
21. Remove pipe coupling (48) from fuel tank (Figure 1, Sheet 1, item 8).
END OF TASK
INSTALLATION
NOTE
Apply sealing compound to all male pipe threads before connecting.
Install tiedown straps as required.
1. Install pipe coupling (48) into fuel tank (Figure 1, Sheet 1, item 8).
2. Assemble adapter (Figure 1, Sheet 3, item 47), drain valve (Figure 1, Sheet 3, item 46), and elbow (Figure 1,
Sheet 3, item 45).
3. Install elbow (Figure 1, Sheet 3, item 45), drain valve (Figure 1, Sheet 1, item 46), and adapter (Figure 1,
Sheet 3, item 47) as an assembly.
4. Install cap (Figure 1, Sheet 3, item 44).
5. If removed, install bulkhead elbow (Figure 1, Sheet 2, Item 39), bulkhead locknut (Figure 1, Sheet 2, Item 43),
oversize washer (Figure 1, Sheet 2, Item 42), and cap (Figure 1, Sheet 2, Item 41) on filler neck pocket (Figure
1, Sheet 2, Item 40).
6. Install elbow (Figure 1, Sheet 2, Item 38) on auxiliary fuel pump (Figure 1, Sheet 2, Item 32).
7. Connect hose assembly (Figure 1, Sheet 2, Item 37) to elbow (Figure 1, Sheet 2, Item 38) on auxiliary fuel
pump (Figure 1, Sheet 2, Item 32) and to bulkhead elbow (Figure 1, Sheet 2, Item 39) on filler neck pocket
(Figure 1, Sheet 2, Item 40).
0056-6
