TM 9-6115-729-24
0031
INSTALLATION
1. Install engine generator compartment ceiling assembly (Figure 1, Item 4).
2. Install four clamps (Figure 1, Item 16) securing two hoses to the engine generator compartment ceiling
assembly. (Figure 1, Item 4) using two screws (Figure 1, Item 13), washers (Figure 1, Item 14), lockwashers
(Figure 1, Item 15), and nuts (Figure 1, Item 17)
3. Install bracket (Figure 1, Item 11) to air cleaner bracket (Figure 1, Item 12) using two screws (Figure 1, Item
8), lockwashers (Figure 1, Item 9), and washers (Figure 1, Item 10).
4. Install engine compartment ceiling assembly (Figure 1, Item 4) using 46 screws (Figure 1, Item 5),
lockwashers (Figure 1, Item 6), and washers (Figure 1, Item 7) from (23 sets on each side).
5. Install seven screws (Figure 1, Item 1), washers (Figure 1, Item 2), and lockwashers (Figure 1, Item 3).
6. Install exhaust system (WP 0068).
7. Install rear roof section housing assembly (WP 0030).
8. Install front roof section housing assembly (WP 0029).
END OF TASK
END OF WORK PACKAGE
0031-4
