ARMY TM 9-6115-672-14
AIR FORCE TO 35C2-3-444-32
MARINE CORPS TM 09244A/09245A-14
4-57
4.7.1
Access Doors.
NOTE
This procedure is written for the left rear engine access door, but is typical for all
access doors, hinges, latches, storage boxes, and data plates.
NOTE
When removing and installation BATTERY ACCESS door, note position of spacers
for door hold open mechanism.
a. Removal.
(1)
Shut down generator set, paragraph 2.11.2.
(2)
Open left side engine compartment access doors (Figure 1-3).
(3)
Remove nuts (1, Figure 4-5), lockwashers (2), washers (3), bolts (4), and hinges (5), with door (6)
attached, from generator set housing.
(4)
Remove nuts (7), lockwashers (8), washers (9), bolts (10), and hinges (5) from door (6).
(5)
Remove locknuts (11), bolts (12), and document box (13) from door (6).
(6)
Drill out rivets (19), and remove wiring diagram data plate (20) from air baffle (13).
(7)
Remove locknuts (23), bolts (24), and bracket (25) with holding rod (26) from door (6).
(8)
Remove locknuts (27), bolts (28), and bracket (29) from door (6).
NOTE
Note position of latches before removal for reference during installation.
(9)
Remove locknuts (30), screws (31), and latches (32) from door (6).
b. Inspection.
(1)
Shut down generator set, paragraph 2.11.2.
(2)
Inspect access doors, hinges, latches, baffles, and storage boxes for loose and missing hardware,
cracks, dents, and loose paint.
(3) Inspect data plates for readability and loose or missing rivets.
