ARMY TM 9-6115-671-14
AIR FORCE TO 35C2-3-446-32
MARINE CORPS TM 09249A/09246A-14
4-167
(8)
Tighten alternator mounting bolt (4) and nut (5).
(9)
Install fan guards, paragraph 4.10.3.
(10) Close engine compartment access doors.
(11) Connect negative battery cable to battery, and close BATTERY ACCESS door.
c. Replacement.
(1)
Shut down generator set, paragraph 2.11.2.
(2)
Open BATTERY ACCESS door (Figure 1-2), and disconnect negative battery cable.
(3)
Open engine compartment access doors (Figures 1-2 and 1-3).
(4)
Remove fan guards, paragraph 4.10.3.
(5)
Loosen alternator mounting bolt (4, Figure 4-24) and nut (5).
(6)
Pivot alternator to relieve tension on fan belt (1), and remove belt from alternator pulley (2),
crankshaft pulley (3), and fan pulley (6).
(7)
Slip fan belt (1) over fan (40, Figure 4-22), and remove fan belt from generator set.
(8)
Slip new fan belt (1, Figure 4-24) over fan (40, Figure 4-22).
(9)
Install new fan belt (1, Figure 4-24) onto alternator pulley (2), crankshaft pulley (3), and fan pulley
(6).
(10) Adjust tension on fan belt (1), step b above.
(11) Install fan guards, paragraph 4.10.3.
(12) Close engine compartment access doors.
(13) Connect negative battery cable to battery, and close BATTERY ACCESS door.
