ARMY TM 9-6115-671-14
AIR FORCE TO 35C2-3-446-32
MARINE CORPS TM 09249A/09246A-14
4-80
(8)
Inspect panel light housings (5) on DCS control panel (6) for cracks, corrosion, stripped threads,
and other damage.
(9)
Install light bulb (2) in panel light housing (5).
(10) Install directional cap (1) on panel light housing (5).
(11) Raise and secure DCS control panel.
(12) Remove DCS control box top panel, paragraph 4.7.2.
(13) Inspect panel light housing (5) on DCS control panel frame (7) for cracks, corrosion, stripped
threads, and other damage.
(14) Install DCS control box top panel, paragraph 4.7.2.
b. Repair.
(1)
Remove directional cap (1, Figure 4-11) from panel light housing (5).
(2)
Remove light bulb (2) from panel light housing (5).
(3)
Install light bulb (2) in panel light housing (5).
(4)
Install directional cap (1) in panel light housing (5).
c. Replacement.
(1)
Shut down generator set, paragraph 2.11.2.
(2)
Open BATTERY ACCESS door (Figure 1-2), and disconnect negative battery cable .
(3)
If defective panel light is on DCS control panel (6, Figure 4-11), release DCS control panel by
turning two fasteners, and lower panel slowly.
(4)
If defective panel light is on DCS control panel frame (7), remove DCS control box top panel,
paragraph 4.7.2.
(5)
Tag and disconnect panel light housing (5) electrical leads.
(6)
Remove jamnut (3), washer (4), and panel light housing (5) from DCS control panel (6) or DCS
control panel frame (7).
(7)
Install panel light housing (5), washer (4), and jamnut (3) on DCS control panel frame (7) or DCS
control panel (6).
(8)
Connect panel light housing (5) electrical leads. Remove tags.
(9)
If removed, install DCS control box top panel, paragraph 4.7.2.
(10) If lowered, raise and secure DCS control panel.
(11) Connect negative battery cable to battery, and close BATTERY ACCESS doors.
