ARMY TM 9-6115-671-14
AIR FORCE TO 35C2-3-446-32
MARINE CORPS TM 09249A/09246A-14
4-73
(15) Remove locknuts (20), bolts (21), and air baffle (22) from left side rear panel (19).
(16) Remove clip halves (23) and insulation (24) from air baffle (22).
(17) Remove locknuts (25), bolts (26), and filler neck panel (27) from left side rear panel (19).
(18) Remove locknuts (30), bolts (31), and output box sill (32) from corner post (40) and panel (50).
(19) Remove locknuts (33) and bolts (34) from door sill (39), corner post (40), and panel (50).
(20) Remove nuts (35), lockwashers (36), washers (37), bolts (38), door sill (39), and corner post (40)
from skid base. Scrape sealant from mating surfaces of corner post and output box top.
(21) Remove nuts (43), lockwashers (44), washers (45), and bolts (46) from panel (50).
(22) Remove bolts (47), lockwashers (48), washers (49), and panel (50) from skid base. Scrape sealant
from mating surfaces of panel and output box top.
b. Inspection.
(1)
Shut down generator set, paragraph 2.11.2.
(2)
Inspect rear housing section panels for dents, cracks, loose paint, corrosion, and other damage.
(3)
Inspect cage nuts (51 through 54, Figure 4-9) for cracking or stripped threads.
(4)
Inspect insulation (24), clip halves (23,55), and push-on nuts (56) for damage or missing pieces.
(5)
Inspect output box EMI seals (57) for tears, looseness, and deterioration.
(6)
Inspect door seals (58 through 61) for tears, looseness, and deterioration.
(7)
Inspect data plates (63 and 65) for readability and loose or missing rivets (62 and 64).
