ARMY TM 9-6115-671-14 AIR FORCE TO 35C2-3-446-32 MARINE CORPS TM 09249A/09246A-14 3-17 TABLE 3-1.  OPERATOR TROUBLESHOOTING (CONTINUED) No Yes No Yes Yes No CIM DISPLAY SCREEN DOES NOT RESPOND TO KEYPAD INPUT TEST CIM display screen works, but backlight does not light or only partially lights. Toggle FAULT RESET switch (12, fig.2-1) to the ON position. Release Fault switch. Does CIM display screen respond to keypad input? Verify DEAD CRANK switch (10, fig.1-30) is set to NORMAL position. Start and operate generator set normally. Refer to para.2.11.1. Set DEAD CRANK switch in NORMAL position. Notify next higher level of maintenance. Toggle FAULT RESET switch (12, fig.2-1) to the ON position. Release FAULT switch. Does CIM display screen respond to keypad input? Start and operate generator set normally. Refer to para.2.11.1. Reboot Toggle FAULT RESET switch (12, fig.2-1) to the ON position. Release FAULT switch. Does CIM display screen respond to keypad input? Start and operate generator set normally. Refer to para.2.11.1. Notify next higher level of maintenance. Yes No