ARMY TM 9-6115-670-14&P
6-85
g. Remove four bolts and lock washers (10) and exciter stator (11) from bearing housing (12).
h. Install exciter stator (11) in bearing housing (12) and secure with four bolts and lock washers
(10).
i. Connect two leads from exciter stator to AVR terminals X and XX (9).
j. Install bearing housing (8) and secure with six bolts, lock washers, and flat washers (7).
k. Install generator housing side cover (3) and secure with two screws, wing nuts and lock
washers (4a) (JTACS), or four slotted hex-head bolts (SICPS and WIN-T), and flat and lock
washers (4).
l. Install generator housing top cover (1) and secure with four screws (JTACS) or slotted hex-
head bolts (SICPS and WIN-T), flat and lock washers (2).
m. Install louvered cover (6) and secure with four bolts and flat washers (5).
Figure 6-31. Exciter Stator (Sheet 1 of 4)
