ARMY TM 9-6115-670-14&P
6-82
6.33. WATER FLANGE.
This task covers: Replace
INITIAL SETUP
Tools
General Mechanic's Tool Kit
(Item 1, Appendix B)
Equipment Conditions
Gear box case and/or cylinder head removed.
Materials/Parts
Water Flange
Water Flange Gasket
Sealing Compound 88205952
(Item 18, Appendix F)
REPLACE
a. Remove the temperature sender block (1, Figure 6-30).
b. Remove two bolts and lockwashers (8) and alternator bracket (7) from water flange.
c. Remove three screws (5 and 6) securing water flange (2) to engine block (4).
d. Remove water flange (2) and water flange gasket (3).
e. Apply sealing compound to both sides of new water flange gasket (3).
f. Install new water flange gasket (3) and new water flange (2) to engine block (4) and secure with
three screws (5 and 6).
g. Install temperature sender mount block (1).
NOTE
Hardware securing temperature sender block is removed
when thermostat is removed in initial SET-UP.
