ARMY TM 9-6115-670-14&P
6-90
6.36. GENERATOR BEARING.
This task covers: a. Inspect
b. Replace
INITIAL SETUP
Tools
Shop Equipment, Electrical Repair,
Semitrailer Mounted
(Item 3, Appendix B)
Equipment Conditions
Exciter stator removed (para 6.34.).
Materials/Parts
Generator Bearing
Bearing Grease
(Item 23, Appendix F)
INSPECT
Inspect bearing for signs of wear or loss of grease.
REPLACE
a. Use a two pronged puller to carefully remove bearing (1, Figure 6-33) from shaft (2).
b. Apply grease to shaft (2).
c. Install bearing (1). Tap lightly with a rubber mallet if necessary. Wipe off excess grease.
Figure 6-33. Generator Bearing
WARNING
Ensure that the APU is off and completely
deenergized before working on generator. Failure to
heed this warning could result in severe injury or
DEATH by electrocution.
