ARMY TM 9-6115-670-14&P
5-127
5.35. INTAKE MANIFOLD.
This task covers: Replace
INITIAL SETUP
Tools
General Mechanic's Tool Kit
(Item 1, Appendix B)
Equipment Condition
Air intake pipe removed (para 4.47.).
Manifold glow plug removed (para 4.38.).
Injection pumplines removed (para 5.14.).
Materials/Parts
Intake Manifold
Intake Manifold Gasket
(Item 6, Appendix J)
REPLACE
a. Loosen four clamps (2 and 5, Figure 5-27) and remove hoses (3 and 6) and elbow (4).
b. Remove two bolts (11), two bolts (10), two bolts (9), intake manifold (1), and manifold gasket
(8).
c. Install new manifold gasket (8) and intake manifold (1) and secure with two bolts (9, 10 and 11).
d. Install two intake hoses (3 and 6) and intake elbow (4) and secure with four clamps (2 and 5).
NOTE
Observe position of bolts (9), (10), and (11) prior to
removal to ensure correct position during installation.
