TM 9-6115-670-14&P
5-124
w. Remove four bolts and lock washers (26), fuel filter bracket (27), and engine mount (28) from
old engine. Install bracket and mount on new engine.
x. Remove four bolts and lock washers (31), muffler bracket (30), and remaining engine mount
(29) from old engine. Install bracket and mount on new engine.
y. Reconnect blade terminal.
z. Reconnect P6 to J6.
aa. Reconnect P7 to J7.
ab. Reconnect P4 to J4.
ac. Reconnect P5 to J5.
ad. Reconnect P8 to J8.
ae. Reconnect P1 to J1.
af. Install fuel line (24, Figure 4-22 SICPS or Figure 4-23 JTACS and WIN-T) between injection
nozzles (8) and day tak (16). Secure with two clamps (23).
ag. Install fuel line (18, Figure 4-22 SICPS or Figure 4-23 JTACS and WIN-T) between day tank
(16) and fuel filter (15). Secure with two clamps (17).
ah. Remove lift ring.
ai. Install the following items on the new diesel engine:
(1) Generator 10 kW to APU frame (para 5.24.).
(2) Wiring Harness P1 (para 5.27.).
(3) Exhaust pipe (JTACS and WIN-T, para 4.40.; SICPS, para 4.41.).
(4) Radiator overflow tank (para 4.28.).
(5) Radiator hoses (para 4.24.).
(6) Fuel lines and fittings (para 4.35.).
(7) Temperature sender (para 4.25.).
(8) Temperature switch (para 4.26.).
(9) Actuator/Solenoid (para 4.49.).
(10) Actuator Linkage (para 4.50.).
