ARMY TM 9-6115-670-14&P
5-119
o. Lift engine/generator mule.
p. On generator exterior bottom remove two hex head socket bolts (SICPS, two hex head bolts)
and lock washers (9), securing generator couplings (8), to bell housing (10) (Figure 5-25).
q. Lower engine/generator mule on to suitable support system.
r. Reach inside generator air vent and remove six screws and lock washers (1), (Figure 5-25)
securing generator to flywheel adapter (7).
s. On generator exterior, remove two socket head screws (SICPS, two hex head bolts and
washer) and lock washers (9) from top securing generator coupling (8) to bell housing (10).
Figure 5-25. Diesel Engine (Sheet 8 of 11)
NOTE
Rotate engine to access hidden bolts using
crankshaft pulley nut.
WARNING
Do not use oil pan located at bottom of generator to
block generator set. Failure to heed this warning could
result in severe damage to equipment or injury to
personnel.
