TM 9-6115-670-14&P
5-130
REPAIR
Repair rocker arm assembly by replacing rocker arms or shaft, as determined in TEST
procedure.
REPLACE
a. Remove three nuts, lock washers, and washers (4) securing rocker arm assembly to mounting
studs (8).
b. Remove rocker arm assembly.
c. Install rocker arm assembly on mounting studs (8).
d. Secure rocker arm assembly to mounting studs (8) with three nuts, lock washers, and washers (4).
Torque nuts between 7.23 and 8.32 ft-lbs (1.0 to 1.15 Nm).
e. Refer to para 5.37 for adjusting valve clearances.
Figure 5-28. Rocker Arm Assembly
NOTE
Always adjust valve clearance after removing or
disassembling rocker arm assembly.
