TM 9-6115-669-13&P
CAUTION
Reinstall the same type of bulb holder that was removed.
a.
Install lamp cap (11, 12, 13) into panel from the front and hold base (9) against panel from the
roar.
b.
Push lamp cap (11, 12, 13) into base (9) and turn clockwise to secure to base (9).
c.
Tighten screws (8) on base (9).
d
Clip bulb holder (6) with bulb (10) into base (9).
e.
Noting correct labeling and position, install cables to terminals of bulb holder (6).
f. Remove stanchion.
g.
Stow prop (3), close access door (2), indicator panel cover (4) and secure.
h. Install stanchion by PDU (1).
4 - 8 3
