TM 9-6115-669-13&P
i.
Unlock lamp cap with housing (13), ring (12), colored plate (14) and ring (15) on front of panel
by turning counterclockwise.
j.
Pull housing (13) out of front of panel. Remove base (10) from back of panel.
CAUTION
Reinstall the same type of bulb holder and pushbutton that was removed.
a.
Insert housing (13) with colored plate (14) and rings (12,161 into front of panel and hold base
(10) against panel from behind.
b.
Push housing (13) and turn clockwise to secure to base (10).
c.
Clip bulb holder (7) with bulb (111 into base (10).
d.
Clip pushbutton (6) into base (10).
e.
Install cables to terminals.
f. Remove stanchion.
g.
Stow prop (3), close access door (2) and indicator panel cover (4) and secure.
h.
Install stanchion by PDU (1).
4 - 8 6
