TM 9-6115-669-13&P
4.23 STORAGE BOX ASSEMBLY MAINTENANCE.
This task covers:
a. Removal
b. Installation
General Mechanic’s Tool Kit
(item 2, appendix B)
Automotive Fuel and Electrical System Repair, Tool
Kit (item 3, appendix B)
Reference
Shut down Generator Set
150 kW,
paragraph 2.8.1.
Cable ties
(item 2, appendix E)
Two
a.
Disconnect all electrical connections and cut cable ties.
b.
Remove four bolts (1, figure 4-37), serrated washers (2), and nuts (3) from the end of the box
(4) facing front of the truck.
WARNING
The box (4) must be supported during the remainder of the
procedure to prevent severe personal injury or damage to
electrical system.
c.
With the aid of an assistant, slowly lower box (4) gradually and remove by sliding toward the
rear of the truck
a.
With the aid of an assistant, slide box (4) into place and align four holes in truck frame with
four holes in the box (4).
b.
Secure box (4) to frame using four bolts (1), serrated washers (2), and nuts (3). Tighten nuts
(3).
c.
Reconnect all electrical connections and secure with cable ties.
4-80
