TM 9-6116-669-13&P
b.
c.
d.
e.
Make sure cable drums are in stowed position.
Position forklift in front of the Generator Set 150 kW and insert forks into forklift sockets (1,
figure 4-24) until 20 inches (500 mm) length of fork is still visible. This distance is necessary in
order to place the Generator Set 150 kW on the truck.
Lift the Generator Set 150 kW and position it above the pallet frame so it is centered over the
four recesses (5, figure 422). Lower the generator set 150 kW into recesses (5).
Perform steps f. through h. and j. through m. in “Installation Using a Crane”.
Figure 4-24 Inserting Forks into the Forklift Sockets of Generator Set 150 kW.
Change 1
4-55
