TM 9-6115-669-13&P
2.7.7 Fire Extinguishing Procedures.
Two fire extinguishers (figure 2-24) are installed on the pallet frame for fire fighting
Powder extinguisher for Class A, B, and C fires.
Continuous delivery powder extinguisher for Class A, B, and C vehicle fires.
WARNING
Use caution around electrical equipment. Do not use when
voltages exceed 1000 V; do not approach closer than 3.3 ft
(1 m).
NOTE
After each use, immediately recharge fire extinguisher and make sure
it is ready to use.
2.7.7.1 Procedure for extinguishing a fire with the powder extinguisher.
Remove fire extinguisher, 13.22 lb (6 kg) from holder on pallet frame:
1. Pull out locking ring (1).
2.
Grasp hose (2), push down handle (3), and release.
3.
Direct nozzle (4) at base of fire while holding down handle (3).
2.7.7.2 Procedure for extinguishing a vehicle fire.
Remove fire extinguisher, 4.4 lb (2 kg) from holder on pallet frame:
1.
Push down locking button (6).
2. Actuate actuation button (6).
3.
Hold unit and fire extinguisher so powder nozzle (7) is directed at base of tire.
2 - 6 1
