TM 9-6115-647-14&P
Figure 4-22. Reflector replacement.
4-34.
Data and identification Plate Replacement. (See figures 4-23 and 4-23 1). There are two
data/identification plates on the front curbside trailer frame and one data plate on the front roadside trailer
frame. Replacement procedures for each are the same, except for the quantity of attaching hardware.
a.
Removal.
(1) Remove four drive screws (1, figure 4-23) and remove data/identification plate (2 or 3) from trailer (4).
(2) Refer to figure 4-23.1 and remove four drive screws (1) and data plate (2) from trailer (3).
b.
Installation.
(1) Position data plate (2) on trailer and secure with four drive screws (1).
(2) Position data/identification plate (2 or 3, figure 4-23) on trailer and secure with four drive screws (1).
Change 1
4-52
