TM 9-6115-647-14&P
b.
Installation.
(1) Position bracket (12) on trailer.
(2) Fasten bracket (12) to fender (18) with two screws (14), four flat washers (15), two lockwashers (16)
and two self-locking nuts (17).
(3) Fasten bracket (12) to trailer frame (13) with two screws (8), two flat washers (9), two lockwashers (10)
and two self-locking nuts (11).
(4) Position walkway (2) on generator supports (7) so that drilled holes in walkway line up with threaded
inserts in generator support. Fasten with six screws (4), six flat washers (5) and six lockwashers (6).
NOTE
When installing roadside walkway, omit step (5).
(5) Install grommet (2) in fuel line hole. Feed fuel line (1) up through hole in walkway (2) and reconnect
fuel line to generator set.
4-48
