TM 9-6115-647-14&P
Figure 4-18. Front Step and Support Replacement.
4-30.
Rear Step Replacement. (See figure 4-19 ). The roadside and curbside rear steps are symmetrical
Replacement procedures are the same for both.
a.
Removal.
(1) Remove three screws (1, figure 4-19), six flat washers (2) and three nuts (3) attaching rear step (4) to
fender (5).
(2) Working under step, remove two screws (6), four flat washers (7) and two nuts (8) attaching rear step
(4) to trailer (9). Remove step.
b.
Installation.
(1) Position rear step (4) on trailer (9) and fender (5).
(2) Working under step (4), fasten step to trailer (9) with two screws (6), four flat washers (7) and two nuts
(8).
(3) Fasten step (4) to fender (5) with three screws (1), six flat washers (2) and three nuts (3).
Change 1
4-46
