TM 9-6115-647-14&P
Figure 4-4. Adapter Plate Assembly Replacement.
4-19.
Power/Control Cable and Auxiliary Cable Testing . (See figure 4-5.). The 75-foot power/control cable
connects the PDU at J1 to the ICC or CRG. The 25-foot auxiliary cable connects the PDU at J10 to the standby
power unit. Except for the length, these two cables are the same. A continuity test is used to detect faults in
these cables. The procedure is the same for both cables.
a.
Set multimeter controls for continuity testing.
Change 1
4-24
